CATL launches the Bedrock Chassis focused on safety

26 December 2024, 10:33:53

CATL officially launched the CATL Bedrock Chassis, the world's first ultra-safe skateboard chassis. With its outstanding performance of withstanding 120 km/h frontal impact without catching fire or exploding, CATL's Bedrock Chassis sets a new standard for intelligent chassis safety, providing comprehensive protection across all scenarios and speed ranges.

With the battery-centered design, CATL's Bedrock Chassis utilizes Cell-to-Chassis integration technology, which directly integrates the battery cells into the chassis, allowing for a shared structural design between them. And based on the decoupling of the chassis from the upper body, the Bedrock Chassis is capable of absorbing 85% of the vehicle's collision energy (compared to around 60% absorbed by traditional chassis).

Through various technological breakthroughs, the Bedrock Chassis successfully passed the world's first "highest speed + strongest impact" dual extreme safety test. This achievement enables the chassis to pass the 120 km/h frontal central pole impact test without catching fire, exploding or thermal runway, redefining the benchmark for safety in the industry.

Currently, the speed for frontal impact safety test in the commonly used C-NCAP (China New Car Assessment Program) is 56km/h, which, when experiencing a frontal impact at this speed, generates collision energy equivalent to falling from 12-meter-high building. In comparison, a frontal impact at 120km/h is equivalent to falling from a 56-meter-high building, generating a collision energy 4.6 times that of collision at 56km/h.

In more stringent frontal pole crash tests, which simulate crashes with non-standard objects such as power poles, large trees, or animals, the impact area is only 1/6 of that in a full-width frontal impact, exponentially increasing impact pressure. At a speed of 120km/h, the impact pressure on the chassis per unit area in a frontal central pole impact is 21 times that of the 56 km/h full-width frontal impact in C-NCAP testing.

Due to the extremely high crash speed and intensity, there has been no previous instance of any new energy vehicle daring to challenge a 120km/h frontal pole impact test. With this extreme challenge, CATL's Bedrock Chassis has blazed a fresh trail for the industry.

The CATL Bedrock Chassis introduces a revolutionary three-dimensional biomimetic tortoise shell structure, where the body and energy unit framework are integrated, deeply coupled to provide the energy unit with indestructible protection. And its aircraft carrier-grade arresting structure disperses impact forces across multiple pathways during a crash, gradually decelerating the vehicle and significantly reducing the depth and speed at which obstacles intrude the cabin. The utilization of submarine-grade hot-formed steel with a strength of 2000MPa, aerospace-grade aluminum alloy with a strength of 600MPa, and multiple barrier structures further enhance the chassis' rigidity, making it virtually impervious.

Moreover, the CATL Bedrock Chassis incorporates an ultra-safe battery cell design, NP technology, and a high-ductility energy-absorbing insulation film, leading the industry in a groundbreaking manner. In terms of high-voltage disconnection, it achieves instantaneous disconnection of high voltage circuit within 0.01 seconds of impact and completes the discharge of residual high-voltage energy in the vehicle within 0.2 seconds, setting a new industry record.

Notably, the battery cells have undergone highly demanding tests, including high-speed sled impact tests at 60 km/h, 90-degree bending tests, and breakthrough sawing tests, the battery did not catch fire or explode across all three tests. These tests, all industry-firsts by CATL, have elevated the safety standards of battery cells to new heights.

Furthermore, the Bedrock Chassis breaks the limits of safety and modeling, and expands design flexibility through the design of decoupling of the chassis from the upper body. The fourth-generation Cell-to-Chassis (CTC) technology and inverted battery cell technology enhance the utilization of chassis space while reducing the risk of chassis scraping. Additionally, in terms of intelligence, the chassis supports mechanical decoupling, software decoupling and EE decoupling, enabling L3 to L4 intelligent driving capabilities. It provides high adaptability interfaces and promotes collaborative intelligent applications.

At the launch ceremony, AVATR, the first automaker to use Bedrock Chassis, and CAIT-SH, CATL's skateboard chassis arm, signed an agreement to deepen cooperation on CATL's Bedrock Chassis to create a safer, higher-quality travel experience for users.

News related to CATL, Bedrock or AVATR

CATL unveiled one of its most ambitious technology lineups to date during its Super Technology Day event in Beijing, introducing six next‑generation battery systems and a fully integrated supercharging and battery‑swapping ecosystem designed to support the future of electrified mobility. The announcements span third‑generation fast‑charging technologies, aviation‑grade condensed batteries, hybrid‑focused chemistries...

24 April 2026

CHANGAN Automobile, together with battery giant CATL, has unveiled the world's first mass‑production passenger vehicle powered by sodium‑ion batteries, marking a pivotal moment in the global transition to next‑generation energy storage. The announcement was made during the "CHANGAN SDA Intelligence Milestone Release & Sodium‑Ion Battery Global Strategy Launch," where the company confirmed that the new vehicle will...

9 February 2026

CATL, the world's largest power battery manufacturer, has begun mass production of its fifth-generation lithium iron phosphate (LFP) batteries, marking a major step forward in energy density and cycle life. Robin Zeng, the company's founder, chairman, and CEO, announced the milestone at the 2025 World Power Battery Conference in Yibin, Sichuan, highlighting CATL's continued leadership in advancing battery...

12 November 2025

CATL presented the Shenxing Pro battery at IAA Mobility 2025. This is the world's first LFP battery that can achieve a sustained high-voltage supply, maintain power, and prevent fire and smoke after thermal runaway. Equipped with CATL's proprietary NP 3.0 technology, this EV battery is available in two variants: Shenxing Pro Super Long Life & Long Range Battery: The world's first LFP battery to deliver a 758 km WLTP...

8 September 2025

CATL unveiled three groundbreaking EV battery products at its inaugural Super Tech Day: The Freevoy Dual-Power Battery, Naxtra - the world's first mass-produced sodium-ion battery, and the second-generation Shenxing Superfast Charging Battery, as well as an integrated 24V start/stop Naxtra battery for heavy-duty trucks. The Freevoy Dual-Power Battery introduces a pioneering cross-chemistry system design that...

24 April 2025

Stellantis and CATL today announced they have reached an agreement to invest up to €4.1 billion to form a joint venture that will build a large-scale European lithium iron phosphate (LFP) battery plant in Zaragoza, Spain. Designed to be completely carbon neutral, the battery plant will be implemented in several phases and investment plans. Targeted to start production by end of 2026 at Stellantis’ Zaragoza, Spain...

10 December 2024

SAIC-GM announced on China's QQ network that they jointly launched with CATL the industry's first 6C ultra-fast charging lithium iron phosphate battery, setting a new technological benchmark. The first innovation in the 6C battery is the super-electronic network cathode technology built with fully nano-based ferromagnetic acid materials that improve the efficiency of electrochemical reactions and enhance the...

26 September 2024

CATL has started building its first battery production facility in North China called. It is a joint investment between CATL, BAIC Group, Beijing Energy Group, Xiaomi Group, and others. The groundbreaking ceremony was held yesterday. Currently, CATL has 11 factories in China and 7 of those are joint ventures with Chinese automakers. This new one will be the 12th in total and the 8th joint venture. Two other CATL...

19 June 2024

CATL unveiled the world's first LFP battery that achieves a range above 1000 km with 4C superfast charging - the Shenxing PLUS. The 1000 km pure electric range comes from continuous technological breakthroughs. The cathode of Shenxing PLUS is made with a granular gradation technology, which places every nanometer particle in the optimal position to achieve ultra-high compact density. The proprietary 3D...

25 April 2024

Stellantis and CATL today announced the signing of a non-binding Memorandum of Understanding (MoU) for the local supply of LFP battery cells and modules to power Stellantis' electric vehicle production in Europe. To further support Stellantis' aggressive electrification strategy, the two companies are considering the possibility of forming a joint venture with equivalent contributions. The MoU outlines a long-term...

21 November 2023

Changan, CATL, and Huawei have launched their second model - the Avatr 12. The sporty fastback made its European debut at the IAA Mobility 2023 in Munich and will enter production later this week. The vehicle is 5020 mm long, 1999 mm wide, 1460 mm high, and has a wheelbase of 3020 mm. The front and rear tracks measure 1688 mm and 1702 mm, respectively. The front fascia includes an active grill at its lower part...

5 September 2023

Reuters reports that CATL will produce its Shenxing battery in Germany and Hungary. The information comes from Gao Pengfei - CATL's chief engineer. The information has been shared at the IAA Munich today. CATL's stand at the show is E30 in Hall A2 of the Munich Exhibition Center and you can visit it from today until September 8th. The Shenxing battery was announced three weeks ago and according to Gao Huan, CTO of...

4 September 2023

Today CATL launched Shenxing, the world's first 4C superfast charging LFP battery, capable of delivering 400 km of driving range with a 10-minute charge as well as a range of over 700 km on a single full charge. Shenxing is expected to considerably alleviate fast charging anxiety for EV users, and opens up an era of EV superfast charging. Shenxing leverages the super electronic network cathode technology and fully...

16 August 2023

It was as early as this January that a CATL-led consortium and Bolivia have reached an agreement for the development of lithium in the country. The government-led Yasimientos de Litio Bolivianos has signed this agreement with the consortium to jointly exploit, refine, process, and market lithium resources on January 20. This past Sunday, the Minister of Hydrocarbons and Energy, Franklin Molina, announced that the...

23 June 2023